User's Guide
$SSHQGL['
6FDODU$,7
$YRLGLQJLQWHUUXSWLRQV
Although the library has effective methods for resuming operation, it is
best to avoid interruptions when the library is operating sequentially. In
particular:
S
Do not reset or power cycle the library unless absolutely
necessary
. Reset the library only to clear certain error conditions
and power off the library only to perform maintenance or to store it.
Avoid resetting or power cycling the library when a cartridge is in
a tape drive or the CHM.
S
Do not open the door unless absolutely necessary
. During
operation, open the door only to replace the magazine after the
library has processed all the cartridges. Never force the door. The
library will not release the door until it has completed a cartridge
move or load already in progress. Certain applications may also
prevent the door from being opened.
S
Do not remove a cartridge from a tape drive or insert a cartridge
into a tape drive
. If you want to remove a cartridge, wait until the
CHM has placed it in the magazine before removing it. If you want
to add a cartridge, add it directly to the magazine.