User's Guide
$SSHQGL['
6FDODU$,7
%HIRUHWKHOLEUDU\UHVWDUWV
Before restarting, the library performs the following actions:
If the CHM was moving a cartridge, it finishes the move. (This
includes inserting the cartridge into the tape drive if the CHM was
moving a cartridge to a tape drive.)
1RWH
If you attempted to open the door, the library does not
release the door interlock until it has completed the move.
The library performs a power-on self-test (POST). If you opened the
door, the library performs its POST after you close the door.
If a cartridge is in a tape drive, the CHM waits for the cartridge to
be ejected, then returns it to its original slot.
As shown in the following tables, the Restart options determine what the
library does next.
6HTXHQWLDOPRGH
/RRSRSWLRQV
The Loop options determine what the library does after it has finished
processing the last cartridge in a sequence. As shown in the following
tables, the library can either loop back to the first cartridge in the
sequence and start processing the cartridges again or stop and wait for
operator intervention. (Operator intervention typically means opening
the library's door, removing the cartridge magazine, installing a new
magazine, and closing the door.)
,I5HVWDUWLV 7KHOLEUDU\
2Q 5HVWDUWVDWVORW
2II 5HVXPHVZKHUHLWOHIWRII