User's Guide
$GYDQFHG2SHUDWLRQ
,QVWDOODWLRQDQG2SHUDWLRQ
To abort the demo, press
>(VFDSH@
, then
>(QWHU@
at the next screen. The
system displays the total number of cycles that were run during the
demo and an Error 91 message, indicating that you have aborted the
demo.
8VLQJWKH'LDJQRVWLFV0HQX
The Diagnostics Menu provides basic exercising functions for
components in your library. You can use these functions to test the
hardware after installation.
6WDUWLQJGLDJQRVWLFV
Before performing diagnostic exercises from the operator panel, do the
following:
If necessary, disable security (see page 34).
Change the control mode to LCD Interface (see page 47).
Refer to the table below for the element indexes. These numbers
correspond to the library components and are necessary for some
tests.
/LEUDU\&RPSRQHQW (OHPHQW,QGH[
)L[HGFDUWULGJHVORW
&DUWULGJHVORWV 6FDODU$,7WR
6HHSDJHVDQGIRUHQWLUHQXPEHULQJ
VFKHPH
7DSHGULYH
7DSHGULYH
&+0