P lan ning Guide Planning Guide Planning Guide Planning Guide 6FDODU . 7DSH /LEUDU\ 6FDODU .
Scalar 10K Tape Library Planning Guide, 6-01337-04 Rev. A, September 2007, Product of USA. Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice. COPYRIGHT STATEMENT Copyright 2007 by Quantum Corporation. All rights reserved.
Contents 1 About This Guide About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Product Safety Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Disposal of Electrical and Electronic Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Product Model Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Accessor Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Expansion Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Drive Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 System Specifications Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-vi Contents 6-01337-04 Rev A
Figures Figure 2-1 Basic Scalar 10K (Customer-Specific Configuration Shown) . . . . . . 2-3 Figure 2-2 Top View of Scalar 10K Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Figure 2-3 Module Cell Locations and Internal View of Library . . . . . . . . . . . 2-10 Figure 2-4 Storage Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Figure 2-5 Top and Side View of EM Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-viii Figures Figure 4-2 AM and EM Footpad Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Figure 4-3 CM and DM Footpad Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Figure 4-4 TM Footpad Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tables Table 2-1 TM Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Table 3-2 Basic COD Configuration: Physical Specifications. . . . . . . . . . . . . . . 3-5 Table 3-3 Basic COD Configuration: Cartridge/Drive Capacities . . . . . . . . . . 3-5 Table 3-4 Basic COD Configuration with Two EMs: Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-x Tables 6-01337-04 Rev A
1 About This Guide About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Product Safety Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Other Documents you Might Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Getting More Information or Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2 About This Guide 6-01337-04 Rev A
1- About This Guide This guide contains information and instructions necessary for the safe operation of the Scalar 10K 1 library. This guide is intended for Quantum sales personnel and potential purchasers of the Scalar 10K library. Be sure to read all operating instructions in this manual and in the System, Safety, and Regulatory Information Guide before operating this product. Product Safety Statements This product is designed for data storage and retrieval using magnetic tape.
information about where you can drop off your waste equipment for recycling, please visit our website at: www.quantum.com/AboutUs/weee/Index.aspx or contact your local government authority, your household waste disposal service or the business from which you purchased the product. Product Model Number The Scalar 10K model number is as follows: SC10K Other Documents you Might Need The following documents are also available for this product. These documents can be found on the product CD or at www.quantum.
Getting More Information or Help More information about this product is available on the Customer Service Center website at www.quantum.com/support. The Customer Service Center contains a collection of information, including answers to frequently asked questions (FAQs). You can also access software, firmware, and drivers through this site.
1-6 About This Guide 6-01337-04 Rev A
2 System Description General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 System Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Capacity-On-Demand Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Customer-Specific Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2 System Description 6-01337-04 Rev A
2- General Description The Scalar 10K is a tape storage library that can be configured as a single media or mixed media library. It can be expanded from a single module library to a multiple module library. The Scalar 10K automates the storage, retrieval, and control of LTO-1, LTO-2, LTO-3, LTO-4, Super DLT (SDLT), and 1/2inch tape cartridges. Cartridges are mounted and unmounted in tape drives using application software from the host without operator intervention.
System Configurations The Scalar 10K can be configured as a Capacity-On-Demand (COD) configuration, Customer-Specific configuration, or a Dual Aisle configuration. For more detailed information about each of the following configurations, refer to Chapter 3, System Configurations. Capacity-On-Demand Configuration In a COD configuration, you receive a fully-populated library but do not use all storage slots. This gives you room to expand in the future.
Modules The Scalar 10K consists of five different modules. For an example of the five different modules, see Figure 2-2 on page 2-8. The Control Module (CM) and Accessor Module (AM) are the fundamental building blocks and are required on every library. See Figure 2-1 on page 2-3. The Expansion Module (EM), Tower Module (TM), and Drive Module (DM) are feature modules and are added as requirements change. The optional EM extends the length of the aisle.
In a Dual Aisle configuration, a safety barrier is included, which allows for concurrent maintenance by trained service personnel. Refer to Dual Aisle Configurations on page 3-14. Expansion Module The EM extends the length of the aisle and allows the library to be expanded to accommodate additional drive and cartridge requirements. In a COD or Customer-Specific configuration, the Scalar 10K can include a maximum of three EMs.
Table 2-1 TM Capacity Media Type Cartridge Capacity LTO 660 SDLT 552 1/2-incha 552 a. The 1/2-inch media type is used in 3592-J1A/TS1120 tape drives. In a Dual Aisle configuration, two inside TMs are required between each AM or EM. Optionally, outside TMs can be attached to the EMs on the primary aisle and secondary aisle. Refer to Dual Aisle Configurations on page 3-14.
Figure 2-2 Top View of Scalar 10K Modules Internal Components Figure 2-3 on page 2-10 shows the inside of a Scalar 10K.
Tape Drives The Scalar 10K supports the following tape drives: • IBM LTO-2 LVD - SCSI • IBM LTO-2 FC Multimode • IBM LTO-3 FC Multimode • IBM LTO-4 FC Multimode • IBM 3592-J1A/TS1120 Drive firmware supports both re-writable and Write Once Read Many (WORM) cartridges. All tape drive types, excluding 3592-J1A/TS1120 tape drives, are enclosed in a Universal Drive Sled (UDS) chassis.
Tower Module Drive Module Control Module Cells I/E Stations Tape Drive Bays Figure 2-3 2-10 System Description Module Cell Locations and Internal View of Library 6-01337-04 Rev A
Storage Assembly A storage assembly (Figure 2-4) is a modular storage assembly that contains tape cartridges. The AM and EM have four attachment areas called racks. Each rack can contain storage assemblies. See Figure 2-5 on page 2-12. Each linear media rack can support total slot capacities as indicated in Table 2-2 on page 2-12. Figure 2-4 Storage Assembly Each rack is divided into five sections counting from top to bottom as shown Figure 2-5 on page 2-12.
Top View of EM Rack Rack Rack Rack Side View of EM Figure 2-5 Storage Assembly Storage Assembly Storage Assembly Storage Assembly Storage Assembly Storage Assembly Storage Assembly Storage Assembly Storage Assembly Storage Assembly Top and Side View of EM Racks Table 2-2 Rack Capacity Media Type Cartridge Capacity per Rack LTO 330 SDLT 276 1/2-incha 276 a. The 1/2-inch media type is used in 3592-J1A/TS1120 tape drives.
Cartridge Accessor The cartridge accessor (Figure 2-6 on page 2-13) identifies and moves cartridges between the storage cells, tape drives, and I/E stations. The cartridge accessor has: • A gripper assembly containing a cartridge gripper and the barcode scanner. The gripper is designed to pivot horizontally 180º, get and put cartridges in storage cells, tape drives, or the I/E station. The gripper fingers are designed to have full range control for open/close to handle different media types.
Tape Cartridges The Scalar 10K automates the retrieval, storage, and control of LTO, SDLT, and 1/2-inch cartridges. Note Duplicate barcode labels (even with different media identifiers) are NOT supported. Two characters are used to identify the cartridge type. For LTO, SDLT, and 1/2-inch cartridges, the media identifier is embedded at the end of the barcode label. All code 39 labels are supported. Refer to the Scalar 10K Operator Guide for more information on label types supported by the Scalar 10K.
Figure 2-7 September 2007 I/E Station Components Internal Components 2-15
Connectivity The Scalar 10K offers several different connectivity options, allowing the library to support a wide range of backup topologies and applications. Flexible library connectivity delivers active support for loop and switched fabric Fibre Channel protocols, network attachment, along with SCSI. SAN Connectivity The Scalar 10K can be connected to a Fibre Channel Storage Area Network (SAN) via the Storage Network Controller (SNC). See Figure 2-8 on page 2-17.
Figure 2-8 September 2007 Indirect Fibre Channel Attachment Connectivity 2-17
SCSI Connectivity The Scalar 10K library can be directly connected to one or two SCSI buses. See Figure 2-9. Because each SCSI bus is independent, it can be Single Ended or Differential. Both ends of each bus must be terminated. A terminator is shipped with each SCSI adapter card ordered. The minimum configuration of a Scalar 10K library requires one SCSI adapter. The SCSI type (Single Ended or Differential) must be specified at the time of order.
Scalar DLC The Scalar 10K, through its Scalar Distributed Library Control (Scalar DLC) interface, provides the industry’s most advanced combination of management and diagnostics. It creates and maintains the Scalar 10K configuration, the physical location of the cartridge accessor, and the inventory of cartridges. The database is kept in flash memory of the Library control hardware. The Scalar DLC attaches to the library SCSI bus.
Figure 2-10 Scalar DLC Network Attachment Redundant Servers The redundant Scalar DLC Integrated Controller for the Scalar 10K Dual Aisle library consists of Scalar DLC 2.5 or later software loaded on two rack-mountable servers. Each Server has Dual SCSI drives that are connected to an embedded RAID controller, 512MB memory, an LVD SCSI card for library connection, and redundant AC power supplies. In addition, each server operates with Windows Advanced Server with Microsoft Cluster Server (MSCS).
Together, these independent servers create a "server cluster." The cluster appears to users as a single server. Should the primary server fail, the secondary (passive) server automatically takes over all Scalar DLC functions. The systems also ships with a rack-mountable flat panel LCD monitor/keyboard/mouse, a rack-mountable KVM switch, a rack-mountable external RAID subsystem, and required system cabling. See Figure 2-11.
Remote Library Management The factory installed Remote Management Unit (RMU) in each system uses a standard web browser for remote library access. The supported browsers are: • Microsoft Internet Explorer version 5.0 and above • Netscape Navigator version 4.01 for Unix and 4.
3 System Configurations Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 System Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Capacity-on-Demand Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2 System Configurations 6-01337-04 Rev A
3- Overview This chapter contains information to help you select the configuration that best meets your needs. This chapter is organized as follows: • System Configuration Overview on page 3-3 • Capacity-on-Demand Configurations on page 3-4 • Customer-Specific Configurations on page 3-8 • Dual Aisle Configurations on page 3-14 System Configuration Overview The Scalar 10K can be configured as a Capacity-On-Demand (COD) configuration, Customer-Specific configuration, or a Dual Aisle configuration.
Capacity-on-Demand Configurations The COD configuration is a self contained library that can be configured with one of four media types; however, you cannot mix media types in any COD system. The COD can be expanded from a basic library configuration to a basic library with three EMs. COD systems do not include TMs. The COD configurations are based on a minimum purchase of 700 cartridge slots. Additional storage can be enabled with an authorization string. For drive types and capacities, see Table 3-1.
Basic Configuration The basic COD configuration includes the following modules: • One AM • One CM • One EM • One DM Figure 3-1 Basic COD Configuration Table 3-2 Basic COD Configuration: Physical Specifications Height Width Depth Maximu m Weight Maximum Distributed Load Maximum Point Load 76.69 in. 1947.9 mm 126 in. 3,200.4 mm 51.94 in. 1,319.27 mm 4,293 lb 1,951 Kg 192.58 lb/ft2 940.2 Kg/m2 46.18 lb/in2 3.
Basic Configuration with Two EMs The basic COD configuration with two EMs includes the following modules: 3-6 • One AM • One CM • Two EMs • Two DMs Figure 3-2 Basic COD Configuration with Two EMs Table 3-4 Basic COD Configuration with Two EMs: Physical Specifications Height Width Depth Maximum Weight Maximum Distributed Load Maximum Point Load 76.69 in. 1,947.9 mm 186 in. 4,724.4 mm 51.94 in. 1,319.27 mm 6541 lb 2,973 Kg 192.58 lb/ft2 940.2 Kg/m2 46.18 lb/in2 3.
Basic Configuration with Three EMs The basic COD with three EMs configuration includes the following modules: • One AM • One CM • Three EMs • Three DMs Figure 3-3 Basic COD Configuration with Three EMs Table 3-6 Basic COD Configuration with Three EMs: Specifications Height Width Depth Maximum Weight Maximum Distributed Load Maximum Point Load 76.69 in. 1,947.9 mm 246 in. 6,248.4 mm 51.94 in. 1,319.27 mm 8789 lb 3,995 Kg 192.58 lb/ft2 940.2 Kg/m2 46.18 lb/in2 3.
Customer-Specific Configurations The Scalar 10K Customer-Specific configuration is a self contained library that can be configured with one to four media types, and expanded from a basic library configuration with one EM to a basic library configuration with three EMs. For drive types and capacities, see Table 3-8.
Basic Configuration The basic Customer-Specific configuration includes the following modules as shown in Figure 3-4. • One AM • One CM For physical specifications of the modules, see Table 4-5 on page 4-6.
Basic Configuration with One EM The basic configuration with one EM includes the following modules as shown in Figure 3-5. • One AM (supporting a DM or TM) • One CM • One TM • One EM (supporting four DMs or TMs) For physical specifications of the modules, see Table 4-5 on page 4-6.
Basic Configuration with Two EMs The basic configuration with two EMs includes the following modules as shown in Figure 3-6. • One AM (supporting a DM or TM) • One CM • One TM • Two EMs (each supporting four DMs or TMs) For physical specifications of the modules, see Table 4-5 on page 4-6.
Basic Configuration with Three EMs The basic configuration with three EMs includes the following modules as shown in Figure 3-7 on page 3-13. • One AM (supporting a DM or TM) • One CM • One TM • Three EMs (each supporting four DMs or TMs) To maximize the number of tape drives when using an LTO-2 DM, a second DM is required for each EM. For physical specifications of the modules, see Table 4-5 on page 4-6.
Figure 3-7 September 2007 Basic Customer-Specific Configuration with Three EMs Customer-Specific Configurations 3-13
Dual Aisle Configurations The Scalar 10K Dual Aisle configuration is a self contained library that can be configured with one to four media types. Note Quantum not support upgrading a COD or CustomerSpecific (single aisle) configuration to a Dual Aisle configuration. In a Dual Aisle configuration, two CMs, two AMs, and two inside TMs are required in every library. The two AMs are positioned back to back with shared TMs in the middle to hold/transfer the data media.
Basic Configuration The basic Dual Aisle configurations are shown in Figure 3-8. For physical specifications of the modules, see Table 4-5 on page 4-6.
Expanded Configuration An expanded configuration includes the modules shown in Figure 3-9. For 3590 drive requirements, you must include one 3590 DM on the outside wall of one of the two aisles. Figure 3-9 Expanded Dual Aisle Configuration Maximum Capacity Configuration A configuration that maximizes capacity is shown in Figure 3-10.
4 System Specifications Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2 System Specifications 6-01337-04 Rev A
4- Overview This chapter contains Scalar 10K system specification information and is organized as follows: • Performance Specifications on page 4-3 • Environmental Specifications on page 4-3 • Electrical Specifications on page 4-4 • Physical Specifications on page 4-6 • Module Footpad Positions on page 4-7 • Barcode Requirements on page 4-10 Performance Specifications The Scalar 10K has peak actions per hour of 450 exchanges and peak time to mount media of 4 seconds.
Electrical Specifications Both the Control Module (CM) and the Drive Module (DM) require two AC power sources. Caution You must install your library with two different power sources to have redundant power. You will NOT have redundant power if you use only one AC power source. If a power failure occurs, your library will fail. The power cable length for each of these inputs is 14 feet (4.26 m). Other electrical specifications for these modules are shown in Table 4-2.
Table 4-3 Typical Module Power Consumption at 200 VAC, 60 Hz Module CM Status AMP kW BTU/hr Not ready (servo off) 1.5 0.21 716 a Ready (servo on)/Not moving 2.8 0.49 1,700 b Ready/Moving 4.4 0.83 2,840 Ready/Moving Read/Write operations to 12 drives 7.3 1.67 5,698 Standby 1.8 0.22 750 Read/Write operations to 24 drives 8.9 1.78 6,073 Read/Write operations to 16 IBM 3592-J1A/TS1120 drives 0.25 1.6 4,912 CM CM CMb, c DMd DM e DMf a.
Physical Specifications For physical specifications for each library module, see Table 4-5. If the Scalar 10K is installed on a raised floor, the raised floor should be stabilized to prevent a horizontal shift of the raised floor structure. The minimum overall floor load rating should be 201 lb/ft2. Quantum recommends a floor load rating of 250 lb/ft2. These ratings do not include additional loading by people and equipment traffic.
Module Footpad Positions The Scalar 10K footpad positions for a library with one AM, one EM, one CM, one TM, and five DMs/TMs is shown in Figure 4-1. For more detailed footpad position information for an AM and EM, see Figure 4-2 on page 4-8. For detailed footpad position information for a CM and DM, see Figure 4-3 on page 4-8. For detailed TM footpad position information, see Figure 4-4 on page 4-9.
AM and EM Footpad Positions Figure 4-2 AM and EM Footpad Positions CM and DM Footpad Positions Figure 4-3 4-8 System Specifications CM and DM Footpad Positions 6-01337-04 Rev A
TM Footpad Positions Figure 4-4 September 2007 TM Footpad Positions Module Footpad Positions 4-9
Barcode Requirements For customers who wish to print the barcode labels, the individual media labels are supported if the labels meet the ANSI MH10.8M-1983 standard and other additional requirements. The requirements are: • ANSI MH10.8M-1983 Standard • • • • • • • Number of digits: 6 Background reflection: at least 25 percent Print contrast: at least 75 percent Ratio: at least 2.2 Module: 250 mm Print tolerance: ± 57 mm Additional Requirements • • • • • Length of the rest zones: 5.25 mm ± 0.
5 Site Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Installation Recommendation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Pallet Packaging Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-2 Site Preparation 6-01337-04 Rev A
5- Overview This section gives installation recommendations and packaging dimensions. It solicits information about the delivery site. Record all requested general information. Installation Recommendation Quantum recommends that you install the Scalar 10K away from a wall, per the specified clearances. However, if the system does not have feature modules located across from the Control Module (CM), you may be able to install the Scalar 10K against a wall.
General Information Place any additional information in Additional Comments on page 5-9. Customer Name: Mailing Address: Shipping Address: Sales Contact: Telephone: Quantum Rep.
Target Installation Date: Target Operational Date: Physical Environment Place any additional information in Additional Comments on page 5-9.
Access Conditions Access to Scalar 10K library room (elevator, stairs, door widths, etc.): Dimensions and Location of Smallest Door or Opening: Loading Dock Specifications (dock height, type of ramps, weather protection, etc.
Semitrailer Accessibility (Y or N): ________ Preferred/Required Local Carrier Company: Where Can Trailer Be Left for Staging? Availability of Material Handling Equipment: Location for Uncrating: Preferred Time of Day for Unloading and Moving Materials: September 2007 Physical Environment 5-7
Off Hours/Weekends Accessibility for Installation Team: Procedure for Obtaining Building Passes: Procedure for Scheduling the Elevator, Loading Dock, etc.
Other Considerations: Additional Comments Record any additional information from other pages. For reference purposes, note the page number with the information. Add and number additional sheets as necessary.
5-10 Site Preparation 6-01337-04 Rev A
Index -AAccess Conditions . . . . . . . . . . . . . . . . . . . . . . . 5-6 Accessor Module . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Additional Comments . . . . . . . . . . . . . . . . . . . . 5-9 Associated Documents Scalar 10K Maintenance Guide . . . . . . . . . 1-4 Scalar 10K Planning Guide . . . . . . . . . . . . 1-4 Scalar 10K SCSI Reference Manual . . . . . 1-4 -BBarcode Requirement . . . . . . . . . . . . . . . . . . . 4-10 -GGeneral Information . . . . . . . . . . . . . . . . . . . . .
-SScalar DLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 SCSI Attachment . . . . . . . . . . . . . . . . . . . . . . . 2-18 Service Requests, Opening . . . . . . . . . . . . . . . . 1-5 Specifications Electrical Specifications . . . . . . . . . . . . . . . 4-4 Environmental Specifications . . . . . . . . . . 4-3 Physical Specifications . . . . . . . . . . . . . . . . 4-6 Storage Assembly . . . . . . . . . . . . . . . . . . . . . . 2-11 -TTape Cartridges . . . . . . . . . . . . . . . . . .
