Operating instructions

Status Menu 4-19
September 2007
Reservations Dialog
Path: Main Menu Status Library SCSI Reservations
Use the Reservations Dialog to view a specific element, or the
entire library. See Figure 4-15.
This reservation remains in effect until:
• The initiator that made the reservation sends another
command with the same Reservation Identification
number (this supersedes any previous reservation).
• The initiator that made the reservation sends a RELEASE
command.
• A reset, or a power-on of the library is preformed.
Figure 4-15 Reservation Dialog
Parameters Description
Bus Displays the SCSI Bus ID
number (0–1)
Host ID Displays the Host ID number
(0–7)
Reservation ID Displays the host’s reservation
identifier (0x00–0xFF, Any)
Found The value of the Found
parameter in the Reservation
Dialog is supplied by the
library firmware and cannot be
changed
Accept Y accept changes
N reject changes
If Y is selected, the Response Screen appears. See
Figure 4-16 on page 4-20. Otherwise, the selected
parameters continue to display but no action is taken.
Bus : 0 <Host ID : 0
Reservation ID: Any
Found : 0000
Accept: N