Operating instructions

4-14 Menus and Commands
6-00058-05 Rev A
Accept Y to accept changes
N to reject changes
If Y is selected, one of twelve response screens appears.
Otherwise, the changed parameters continue to display
but no action is taken.
Element Address
Use Element Address to check current, default, or saved
addresses of the accessor, storage cell, I/E station, or tape
drives. See Figure 4-11.
Figure 4-11 Element Address Screen
Parameter Description
Base MT Current, default, or saved base
accessor address
Base ST Current, default, or saved base
Storage Cell address
Base IE Current, default, or saved base
Insert/Eject station address
Base DT Current, default, or saved base
tape drive address
Base MT : 00001
Base ST : 04096
Base IE : 00016
Base DT : 00256