Operating instructions

4-10 Menus and Commands
6-00058-05 Rev A
Mode Dialog
Path: Main Menu Mode Dialog
Use the Mode Dialog to change the library operating mode
and/or state. For example, you can set the library to Online or
Offline. See Figure 4-3.
Figure 4-3 Mode Dialog
Depending on your selection, one of the following appears
(Ready Screen, NotReady Screen, or Shutdown Screen).
Look into the aisle to make sure there are no obstructions
or personnel present prior to selecting the Ready state.
Movements of mechanical components in the library can
cause serious injury.
Parameters Description
Mode Online - host accessible
Offline - maintenance or
administrator accessible only
Shutdown - prepares the
library for shutdown
State Ready - accessor is available
for use
NotReady - accessor is not
available
Accept Y to accept changes
N to reject changes
When Ready is selected, the Ready Screen appears. See
Figure 4-4.
Figure 4-4 Ready Screen
Online ...........Ready
>Online
Ready
Accept: N
Warning
Note
If Shutdown is
selected for the
Mode parameter,
Shutdown is
automatically
displayed for the
State parameter.
Changing state to:
>READY<