Operating instructions

3-16 System Description
6-00058-05 Rev A
•In Public Name, enter the name of the read-
only SNMP community.
•In Private Name, enter the name of the
read/write SNMP community.
Step 3 Click Submit and review your changes (indicated
in red).
Step 4 Enter your password and click Confirm to
complete the procedure.
The new values are saved. Note that you may need
to redirect your Web browser if you are logged out.
Step 5 Click Done.
You may be instructed to reboot the RMU. Refer to
Rebooting the RMU on page 4-21 for more
information.
Downloading the SNMP MIB File
The SNMP Management Information Base (MIB) file allows
an SNMP management application to understand the SNMP
database and alerts generated by the RMU. If you are running
an SNMP management application and need the library MIB,
you can download it by means of the RMU.
Step 1 Click SNMP MIB in the left pane of the RMU
interface.
Step 2 Right-click Download SNMP MIB and click Save
Target As.
Step 3 Browse to your SNMP management server and
click Save.
You will need to load the MIB file into the SNMP
management application.