Operating instructions

Using the Remote Management Unit 3-13

September 2007

Step 6 Enter the IP address, subnet mask, and gateway IP

address using the Up, Down, and Next buttons.

Step 7 Select Y to accept the changes.

Accessing and Logging Into the RMU

Before you begin using the RMU, make certain you have

configured your RMU with the correct network address.

Step 1 Open a Web browser.

Step 2 Point your browser to the RMU IP address,

excluding any leading zeros. For example, if your IP

address is 182.073.056.205 on the library operator

panel LCD, go to the following address:

http://182.73.56.205.

The RMU user interface displays. Some of the features of

the RMU require you to log in. Continue with Step 3 to

log into the RMU.

Step 3 Log into the RMU when prompted. Enter your user

name into the User Name field and password into

the Password field. The user name and password

are case sensitive.

Note

For information

on determining

or setting your

RMU IP address,

see Setting up the

RMU on page

4-12.

Note

The default user

password are

admin and secure,

respectively.