Operating instructions

3-12 System Description
6-00058-05 Rev A
Setting up the RMU
Once you have obtained a network address for the RMU,
enter this information into the RMU by means of the library
operator panel.
Step 1 Starting from the operator panel Main Menu, go to
the RMU Submenu (Main Menu Setup
Library RMU).
The RMU Submenu is shown.
Step 2 Select Host.
The Host Dialog is shown.
Step 3 Enter the host name using the Up, Down, and Next
buttons.
Step 4 Select Y to accept the changes.
Step 5 Select IP.
The IP Dialog is shown.
>Host...
IP...
Host :
Accept : N
IP : 100<100.100.100
Sub: 225.225.225.001
Gat: 100.100.100.100
Accept: N