Operating instructions

3-8 System Description
6-00058-05 Rev A
Figure 3-2 Main Screen
Shutting Down the Scalar 10K
The Scalar 10K may be shut down normally or by the
Emergency Shutdown method.
Use the method described in Emergency Shutdown in cases
of emergency only.
Normal Shutdown
Proceed as follows to shutdown the Scalar 10K:
With the RMU installed, power up must be delayed by one
minute after a power down condition to allow the RMU to
properly reset.
Step 1 If necessary, use the button to return to the
Main Menu. The cursor defaults to the Mode
selection. Press the button. From the Mode
screen, use the button to select the Shutdown
mode.
Press the button.
The Accessor completes the current task and returns to
the home position. The reboot message appears. See
Figure 3-3.
Figure 3-3 Reboot Screen
MAIN SCREEN
MM/DD/YY
Idle
Online.........Ready
HH/MM/SS
Warning
Caution
The library may now
be rebooted.