Operating instructions

3-6 System Description
6-00058-05 Rev A
Holding down the push buttons cycles through the options.
The longer the push button is held down, the faster it cycles.
Table 3-3 provides an illustration and description of the visual
indicators on the operator panel.
Table 3-3 Insert/Eject Station Indicators
Use Escape to:
• leave the current menu and returns to the previous menu, if it
exists.
• move back one menu item.
• exit Help and return to the previous menu.
Use Help to display help text for the current selected item if
available. In this mode, the Arrow buttons scroll through the help
text and the Escape button is used to exit Help.
Use Ready to transition the library from a Ready state to
NotReady, or NotReady to the Ready state.
Indicator Description
The Locked indicator is On whenever the I/E station is locked.
One of the following conditions locks the I/E station:
• The host issues a SCSI PREVENT/ALLOW MEDIUM
REMOVAL command and locks the I/E station.
• The Scalar 10K is accessing the I/E station.
The Attention indicator can be in one of the following three
states:
• Off: All cartridge magazines are present and do not contain an
ejected tape cartridge.
• On: One or more magazines is missing, or a magazine contains
an ejected tape cartridge.
• Blinking: A lock command is pending and the I/E station door
is not closed, or a lock command failed.
Table 3-2 Operator Panel Push Buttons (Continued)
Push button Description