Operating instructions

Using the Operator Panel 3-5
September 2007
Table 3-1 illustrates and describes operator panel indicators.
Table 3-2 describes operator panel push buttons.
Table 3-1 Operator Panel Indicators
Indicator Description
The Ready indicator is lit whenever Power is available in the aisle
and the library is ready to perform motion commands from the
host.
The Power On indicator is lit whenever the Control Module is
connected to an AC power source, the Control Module switch, and
the AC Power Compartment circuit breakers are ON.
Table 3-2 Operator Panel Push Buttons
Push button Description
Use Up Arrow to:
• scroll the display to show the previous line.
• move the cursor (>) up from selection to selection.
• increment the current value in a numerical entry field.
Use Down Arrow to:
• scroll the display to show the next line.
• move the cursor (>) down from selection to selection.
• decrement the current value in a numerical entry field.
Use Enter to:
• select the option indicated by the cursor (>) as the next action to
be performed by the library.
• act as a TAB button to the next required entry field when
multiple field entries are being entered. In this case, the button
cycles through all the entry locations until the Accept option is
chosen (with Y).