Operating instructions

Overview 3-3
September 2007
4-
Overview
This chapter describes the Scalar 10K library operator panel,
the library startup and shutdown procedures, and the Remote
Management Unit (RMU).
Using the Operator Panel
The operator panel provides an interactive path between the
operator and the Scalar 10K. See Figure 3-1 on page 3-4.
The Scalar 10K operator functions are listed below:
• Starting the Scalar 10K
• Shutting down the Scalar 10K
• Handling media
Refer to Inserting Tape Cartridges on page 6-6 for media
handling procedures. In the case of equipment failures, the
operator can perform manual media processing.
Look into the aisle to make sure there are no obstructions or
personnel present prior to applying library power.
Movements of mechanical components in the library can
cause serious injury.
Warning