Operating instructions

2-18 System Description
6-00058-05 Rev A
SCSI Connectivity
The Scalar 10K library can be directly connected to one or two
SCSI buses. See Figure 2-9. Because each SCSI bus is
independent, it can be Single Ended or Differential. Both ends
of each bus must be terminated. A terminator is shipped with
each SCSI adapter card ordered.
The minimum configuration of a Scalar 10K library requires
one SCSI adapter. The SCSI type (Single Ended or
Differential) must be specified at the time of order.
Although the Scalar 10K can be attached to a wide SCSI bus,
it is not a wide SCSI device and its SCSI ID must be in the
range of 0 to 7.
Figure 2-9 Direct SCSI Attachment