Operating instructions
Explanation of Symbols and Notes 1-7
September 2007
The danger exists of a fatal electric shock. At places
designated with this symbol, electrical current can be
present. Before starting any work, always confirm that all
electrical connections are free of electrical current.
This symbol indicates the presence of a laser.
Caution - use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
When used with the signal word Warning, this symbol
warns of a dangerous situation that threatens personnel
with serious injury or death.
When used with the signal word Caution, this symbol
means that specific regulations, rules, notices, and working
procedures must be observed. Ignoring this symbol can lead
to equipment damage or destruction or to other property
damage.
This symbol indicates that the risk of equipment damage
exists due to static discharge. This symbol indicates that you
should refer to the “Electrostatic discharge (ESD)” section of
the System, Safety, and Regulatory Information Guide.
This symbol draws attention to user tips. No dangerous or
damaging consequences for personnel or property are
associated with this symbol.
This symbol indicates important or useful information. No
dangerous or damaging consequences for personnel or
property are associated with this symbol.
Other documentation conventions:
<1> + <2> Press these keys simultaneously.
Italics Headline, for example, Chapter 2,
Description
File name, for example, AMUINST.EXE
Bold Operator panel menu selections, for
example:
Main Menu Status Drives Firmware
Y to accept changes
N to reject changes
Caution
Warning
Caution
STATIC
SENSITIVE
Note