Operating instructions

6-12 Error Messages
6-00058-05 Rev A
• 01-48: For drive failures, this value indicates
drive location, with 01 being the bottom right
drive location (viewing from the back of the
module) and 48 being the top left drive location
(for UDS half-height). Drives are counted from
right to left and bottom to top. For information on
drive location numbering for all drive types, see
Figure 6-1 on page 6-13 and Figure 6-2 on page 6-
14.
— or —
• 01-04: For I/E Station failures, the value indicates
the Insert/Eject station number from 1 to 4.
— or —
• 01-04: For UDS Power Supply failures, this value
indicates drive bay number from 1 to 4 with 1
being the bottom drive bay and 4 being the top
drive bay. For more information on drive bay
numbering for each drive type, see Figure 6-1 on
page 6-13 and Figure 6-2 on page 6-14.
— or —
• 01-05: For Storage Assembly failures, this value
indicates section numbers within a rack from 1 to
5, with 1 being the top section and 5 being the
bottom section.
• z is the single digit character error code displayed by
certain tape drives on a SAC 96.