Operating instructions

6-4 Error Messages
6-00058-05 Rev A
Operator Intervention Messages
Table 6-1 describes the operator intervention messages. Each
message may contain up to four lines of information,
including variable information that is specific to the message.
For SAC indications, refer to Service Action Codes on page 6-
11.
Table 6-1 Operator Intervention Messages
Message Lines Variables
MOTION PROHIBITED!
Safety flag is reset
when aisle door is
opened.
None.
Alert not found.
Press Enter.
None
-=>ERROR!<=-
Initialization Error
Code: 0x%Y
%Y = 0x(8 digits) error
modifier
-=>PERM ERROR!<=-
CALL FOR SERVICE
SAC: %X %R %B %E
Code:0x%Y
%X = 2-digit hex
%R = 2-digit decimal
%B = 2-digit decimal
%E = 1-digit hex
(not always present)
%Y = 8-digit hex
-=>PERM ERROR!<=-
SYSTEM WILL REBOOT
SAC: %X %R %B %E
Code:0x%Y
%X = 2-digit hex
%R = 2-digit decimal
%B = 2-digit decimal
%E = 1-digit hex
(not always present)
%Y = 8-digit hex
->SYSTEM REBOOTED<-
NEW CODE LOADED
Version %XXXA.%YYYYY
XXX = major revision
YYYY = minor revision
For example:
224A.00001
XXXA = 224A
YYYYY = 00001