Operating instructions

5-18 Processing Media
6-00058-05 Rev A
Step 2 Enter the Media Type and BC (number of the
cleaning cartridge you want to insert), and then
select Y in the Continue field.
The Usage Dialog appears. See Figure 5-13 on page 5-18.
Figure 5-13 Usage Dialog
Step 3 Enter Current Use (how many times the cleaning
cartridge has been used), and Maximum Use (how
many times the cleaning cartridge can be used), and
then select Y in the Accept field.
View Dialog
Check to see status of your cleaning cartridges.
For further information refer to View Dialog on page 4-98.
Step 1 From the operator panel Main Menu, select
Setup Cleaning View.
The View Dialog appears and displays the BC number,
Status (reset, expired, missing, or valid), Max (times you
can use the tape), Count (how many times the tape has
been used), Index (device address). See Figure 5-14.
Figure 5-14 View Dialog
Current Use: 000<
Max Use: 000
Accept: N
BC: CLN001
Status: Reset
Max: 000 Count: 000
Index: 001<RESET: N