Operating instructions

Understanding Barcodes 5-13
September 2007
• Bars should read in a uniform direction. Nonuniform
reading directions are feasible in principle, but have a
detrimental effect on performance.
• Each label should be applied in the upper right corner
of the tape cartridge recess (when oriented vertically).
• Quality Testing
Compliance with these specifications can be checked and
documented with the Ergilaser 3000 High Density barcode
measuring device that is manufactured by the Laetus
Company.
Applying Labels
All barcode labels are applied to the front of a tape cartridge.
Depending on the media type, barcode labels are either
stickers that adhere to the front of the cartridge or are cutouts
that slide into an indentation on the front of the cartridge.
See Figure 5-10 on page 5-13 for more information on
applying a barcode label.
Do not place a barcode label on top of a cartridge. Placing a
barcode label on top of a cartridge can cause a library
inventory operation to fail.
Figure 5-10 Barcode Label Application (LTO Example)
Caution
Do not place a barcode
label on top of a cartridge