Operating instructions

Inserting Tape Cartridges 5-9
September 2007
Step 9 Continue bulk loading your cartridges.
When your bulk load completes, proceed as follows:
Step 1 Close the TM service door.
Step 2 Set the Mode field to LIBRARY.
See Figure 5-5
.
Figure 5-5 Set Status Dialog
If Y is selected for the Accept parameter value, Tower
Mode Change in Progress appears. See Figure 5-6.
If N is selected for the Accept parameter value, the
display returns to USER mode and no action is taken.
Figure 5-6 Tower Mode Change In Progress
Tower : 01 LTO <
Mode : LIBRARY
State : READY
Accept: N
Requested command is
now in progress.