Operating instructions

4-172 Menus and Commands
6-00058-05 Rev A
Report Dialog
Path: Main Menu Service Verify Report
Use the Report Dialog to generate a print of the installation
verification test. See Figure 4-279.
Before selecting this option, make sure that a serial print cable
is connected to a serial port, before you generate a print.
When the Report is selected, the Report Screen is displayed.
See Figure 4-279.
Figure 4-279 Report Screen
If Y is selected for the Continue parameter value, the
Response Screen appears.
See Figure 4-279. Otherwise, the changed parameter
continues to display but no action is taken.
Figure 4-280 Response Screen
Advanced Submenu
Path: Main Menu Service Advanced
For Quantum use only.
Figure 4-281 Advanced Submenu
Connect Serial Cable
Between Top LSC Port
and PC Serial Port
Continue: N
Requested command is
now in progress...
> Status
Mounts...
Other...