Operating instructions

4-170 Menus and Commands
6-00058-05 Rev A
Figure 4-275 Include Drives Dialog
Parameters Description
Include Drives Y indicates that the drives are
included in the moving of the
cartridges
N indicates that the drives are
not included in the moving of
the cartridges
Accept Y to accept the changed
N to reject the changes
If Y is selected, the Response Dialog appears. See
Figure 4-276. Otherwise, the changed parameters
continue to display but no action is taken.
Figure 4-276 Response Dialog
Parameters Description
Cancel Y to cancel the test
N to continue running the test
The value of the Move parameter in the Response
Dialog is supplied by the library firmware and
cannot be changed. The Move parameter indicates
the number of completed moves.
The value of the Status parameter in the Response
Dialog is supplied by the library firmware and
cannot be changed. The Status parameter shows the
status of the indicated move (Running, Completed,
Error, Canceled).
If Y is selected for the Cancel parameter value, the test is
canceled. Otherwise, the test continues.
Include drives: Y
Accept: Y
Note
The Demo feature
does not work with
3590 drives. If your
library contains 3590
drives, do not
include drives in the
Demo.
Demo with Drives
Move :5 of 9
Status:Running
Cancel: N<
Note
If the operation
stops, the Cancel
parameter no
longer displays.