Operating instructions

4-144 Menus and Commands
6-00058-05 Rev A
Parameters Description
Device Displays the loopback tests to
run (LMC, LIE, LPN))
Number Displays which device
number should be tested. This
field is always set to 01
because there is only one of
each device to be tested in the
Scalar 10K
Accept Y to accept changes
N to reject changes
If Y is selected, the Response Screen appears. See
Figure 4-221. Otherwise, the changed parameters
continue to display but no action is taken.
Figure 4-221 Response Dialog
Parameters Description
Results Passed indicates that the test
executed successfully
Failed indicates that the test
did not execute successfully
Accept Y to accept change
N to reject changes
Device:LMC
Number:01
Results:PASSED
Accept: N