Operating instructions

Service Menu 4-135
September 2007
Figure 4-203 Response Dialog
Parameters Description
Cycle The number of completed test
cycles of the requested cycles
Status Shows the status of the
indicated cycle (Running,
Completed, Error, Canceled)
Cancel Y to cancel the test
N to continue running the test
If Y is selected for the Cancel parameter value, the test is
canceled. Otherwise, the test continues.
Step Dialog
Path: Main Menu Service Diags Gripper Step
Use Step to set low level control of Gripper functions. Only
trained service personnel should use this function. See Figure
4-204.
Figure 4-204 Step Screen
DIAGS GRIPPER TEST
Cycle :006 of 009
Status:Running
Cancel: N<
Note
If the operation
stops, the Cancel
parameter no
longer displays.
This test should be
used by trained
personnel ONLY!
Continue: N<