Operating instructions

Service Menu 4-133
September 2007
Get/Put Drives Dialog
Path: Main Menu Service Diags Gripper Get/Put
Drives
Use the Get/Put Drives dialog to perform a get and put of all
cartridges in a specified range to a specific drive. See Figure 4-
200.
Drives to be tested must have a cartridge loaded. If no
cartridge is loaded in the drive, the drive will be skipped
during the test.
Figure 4-200 Get/Put Drives Dialog
Parameters Description
Cycles to run Displays the number of cycles
to run (1–999)
[more] More selections on the
Continuation Dialog
When [more] is selected, the Continuation Dialog
appears. See Figure 4-201.
Figure 4-201 Continuation Dialog
Parameters Description
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
rack number (01–16)
The third field indicates the
storage cell section (1–5)
The gripper test will
get/put media
Cycles to run:009<
[more]
Enter SOURCE
Coordinate : D 01 1< A 01
Index : 00001
Accept : N