Operating instructions

Service Menu 4-129
September 2007
Trace
Path: Main Menu Service Diags Accessor Trace
Use Trace to monitor the following error of the accessor
motors and print the error information to the library trace.
The option should be used only by trained service personnel.
See Figure 4-194.
Figure 4-194 Accessor Trace Screen
Parameters Description
Speed NORMAL, MEDIUM, or
SLOW. The speed cannot be
faster than the system setting
Gripper Submenu
Path: Main Menu Service Diags Gripper
Use the Gripper Submenu to select Get/Put actions for
storage or a drive. See Figure 4-195.
Figure 4-195 Gripper Submenu
Depending on your selection, refer to:
• Get/Put Storage Dialog below
• Get/Put Drives Dialog on page 4-133
• Step Dialog on page 4-135
• Test Dialog on page 4-136
DIAGS ACCESSOR TRACE
Speed: NORMAL<
Accept: N
> Get/Put Storage...
Get/Put Drives...
Step...
Test...