Operating instructions

4-128 Menus and Commands
6-00058-05 Rev A
Step
Path: Main Menu Service Diags Accessor Step
Use Step to provide low level accessor control. The option
should be used only by trained service personnel.
See Figure 4-192.
Figure 4-192 Step Screen
Parameters Description
Continue Y to continue the test.
N to cancel the test
If Y is selected for the Continue parameter value, the
Response Screen appears. See Figure 4-193.
Figure 4-193 Movement Screen
Parameters Description
X axis Displays X axis location
Y axis Displays Y axis location
Amount Displays the move step
distance (1, 10–100 mm)
This test should be
used by trained
personnel ONLY!
Continue: N<
Note
There is a .3mm
tolerance for each
x-axis or y-axis
step.The Step
screen display does
not show the exact
step movement.
Use Arrows to Move
X axis : 1057.9mm<
Y axis : 0000.0mm
Amount : 001.0mm