Operating instructions

4-124 Menus and Commands
6-00058-05 Rev A
See Figure 4-185. Otherwise, the flow continues with
either the Start Dialog with No Errors, see Figure 4-
186, or the Start Dialog with Errors, see Figure 4-187.
Figure 4-185 Confirm Change Dialog
Parameters Description
Confirm change Y to accept changes to PM
values
N to reject changes to PM
values
If Y is selected for the Confirm Change parameter value
and no errors were present, the Start Dialog with No
Errors is displayed. See Figure 4-186.
If Y is selected for the Confirm Change parameter value
and recent errors were present, the Start Dialog with
Errors is displayed. See Figure 4-187 on page 4-125.
This option provides information for a service call.
The Service Action Code (SAC) is based on the displayed
error code. Refer to Service Action Codes on page 6-11
for additional information. Refer to document number
600418, Scalar 10K Maintenance Manual for a course of
action related to the displayed SAC.
If N is selected for the Confirm Change parameter value,
the Preventative Maintenance Due is displayed.
Figure 4-186 Start Dialog with No Errors
Confirm change?N<
Note
Press the
button or the
button to
scroll between
SAC values.
There are no more
SACs to report