Operating instructions

Service Menu 4-123
September 2007
Service Menu
Path: Main Menu Service
Use the Service Menu to select library diagnostics or
exercisers. These options should only be used by trained
service representatives or administrators. See Figure 4-183.
Figure 4-183 Service Menu
Depending on your selection, refer to:
• Start Dialog below
• Diags Submenu on page 4-125
• Teach Submenu on page 4-156
• SAC Dialog on page 4-168
• Demo Dialog on page 4-169
• Verify Submenu on page 4-171
• Advanced Submenu on page 4-172
Start Dialog
Path: Main Menu Service Start
Use the Start dialog to check and reset Preventative
Maintenance (PM) SAC codes. The Dialog flow is either Start
Dialog with No Errors or Start Dialog with Errors (displays
the last SAC Code). See Figure 4-184.
Figure 4-184 Preventive Maintenance Due Dialog
Parameters Description
Reset PM values Y to reset PM values
N to keep PM values
If Y is selected for the Reset PM values parameter value,
the Confirm Change Dialog is displayed.
> Start... Demo...
Diags Advanced
Teach
SAC
...
Note
You can press
escape to display
the last SAC code.
PM Due: 01/06/01
X Remain: 000499974
Y Remain: 000499879
Reset PM values?N<