Operating instructions

4-120 Menus and Commands
6-00058-05 Rev A
Towers Submenu
Path: Main Menu Utils Towers
Use the Towers Submenu to initialize or change the status of
the selected tower. See Figure 4-175.
Figure 4-175 Towers Submenu
Depending on your selection, refer to:
• Status Change Dialog below
• Initialize Dialog on page 4-122
Status Change Dialog
Path: Main Menu Utils Towers Status Change
Use the Status Change to change who has access to the tower,
the library or the user. See Figure 4-176.
Figure 4-176 Set Status Dialog
Parameters Description
Tower Displays the tower rack
number, media type of the
installed towers (01–16), and
”DUAL“ if the tower is shared
on a dual aisle system.
Mode Displays the mode of the
tower (LIBRARY, SERVICE,
USER)
State Displays the state of the tower
(READY, NOT READY)
Accept Y to accept the changes
N to reject the changes
> Status Change...
Initialize...
Tower: 01 LTO<
Mode: LIBRARY
State: READY
Accept: N