Operating instructions

Utils Menu 4-113
September 2007
Figure 4-162 Starting Drive
Figure 4-163 Ending Drive
If Y is selected, the Update Microcode screen appears and
shows the drive location of the drive being updated. See
Figure 4-164. Otherwise, the changed actions continue
to display but no action is taken.
Figure 4-164 Update Microcode Screen
Parameters Description
Status Running indicates that the
current command is in
progress
Completed indicates the
firmware on all the drives in
the cycle has been updated.
Canceled indicates the cycle
has been canceled
ERROR! indicates an error has
occurred
Cancel Y to cancel the cycle
N to continue the cycle
If Y is selected for the Cancel parameter, the cycle is
canceled and the Cancel parameter does not appear.
Enter Starting Drive
Coord: D 03< 1 A 01
Index: ST 00001
Accept : N
Enter Ending Drive
Coord: D 03< 1 A 01
Index: ST 00001
Accept : N
-UPDATE MICROCODE-
Drive: D31A1
Status: Running
Cancel: N<