Operating instructions

4-112 Menus and Commands

6-00058-05 Rev A

Update Microcode Dialog

Path: Main Menu Utils Drives Operations Update

Microcode

Use the Update Microcode Dialog to initiate a drive firmware

update. See Figure 4-161.

The operator must determine the location coordinate and

index of the firmware update tape prior to following this

procedure.

Figure 4-161 Update Microcode Dialog

Parameters Description

Coord The first field indicates the

type of cell (D for Drive)

The second field indicates the

rack number (01–16)

The third field indicates the

drive bay section (1–4)

The fourth field indicates the

column of the section (A–B)

The fifth field indicates the

row of the column (01–6)

Index The device address associated

with the selected coordinate

parameter

Accept Y to accept

N to reject

If Y is selected, the Starting Drive and Ending Drive

screens appear. See Figure 4-162 on page 4-113 and

Figure 4-163 on page 4-113.

Enter SOURCE

Coord: S 01< 1 A 01

Index: ST 00001

Accept : N