Operating instructions

4-100 Menus and Commands
6-00058-05 Rev A
Screen Dialog
Path: Main Menu Utils Library Screen
Use the Screen Dialog to control the operator panel LCD
screen. See Figure 4-141.
Figure 4-141 Screen Dialog
Parameters Description
Backlight Enable Y to enable LCD backlighting
N to disable LCD backlighting
Use Screen Saver Y to enable the screen saver
N to disable the screen saver
Accept Y to accept changes
N to reject changes
If Y is selected for Use Screen Saver and Accept
parameters, the Timeout Value Dialog appears. See
Figure 4-142. Otherwise, the screen returns to the
Library Submenu. See Figure 4-140 on page 4-99.
Figure 4-142 Timeout Value Dialog
Parameters Description
Timeout Value 10–60 minutes (default = 30)
Password enable Y to enable a screen saver
password
N to disable a screen saver
password
Accept Y to accept changes
N to reject changes
If Password enable changes from N to Y or Y to N and
Accept changes to Y, the Password Dialog appears. See
Backlight Enable: Y<
Use Screen Saver: N
Accept: N
Timeout Value: 30<
Password Enable: N
Accept: N
Note
Password enable
can change from
Y to N only if a
password was
previously set.