Operating instructions

4-90 Menus and Commands
6-00058-05 Rev A
If Y is selected and you are using dual port fibre channel
drives, the Continuation Screen appears for the second
fibre channel port. See Figure 4-128 on page 4-90.
Figure 4-128 Drive Parameters Screen (Port 2)
Parameters Description
Drive Drive number and coordinate
position
ID Current SCSI/Loop ID of the
drive
New ID New SCSI/Loop ID of the
drive
Port Fibre channel port number
Accept Y to accept changes
N to reject changes
If Y is selected, the Continuation Screen appears for the
second fibre channel port. See Figure 4-127.
Figure 4-129 Continuation Screen (Port 2)
Parameters Description
Drive Drive number and coordinate
position
Speed Data rate (Auto, 1 GB, 2 GB)
Auto: The library auto
negotiates the data transfer
rate.
1 GB: 1 Gigabit/sec
2 GB: 2 Gigabit/sec
Drive: DT 00001<
[08-1-A-01]
ID: 000 New ID: 000
Port : 2 Accept: N
Note
Drive changes do not take
place until the drive is
activated.
Drive: DT00010
Speed: Auto
Topology: Auto
Port : 2 Accept:N