Operating instructions

4-68 Menus and Commands
6-00058-05 Rev A
Parity Dialog
Path: Main Menu Setup Library SCSI Parity
Use the Parity Dialog to set the SCSI bus parity. Changes do
not take effect until library power is cycled. See Figure 4-93.
Figure 4-93 Parity Dialog
Parameters Description
Parity: Next YES to enable SCSI parity
NO to disable SCSI parity
Parity: Now YES indicates parity dialog is
supplied by the library
firmware
NO ignores the Retries
parameter
Retries: Next Set the number of retries
(000–255) allowed when a
SCSI parity error is detected
Retries: Now YES indicates parity dialog is
supplied by the library
firmware
NO indicates the current
number of retries allowed
(000–255) when a SCSI parity
error is detected
Accept Y to accept changes
N to reject changes
If Y is selected, the screen updates to reflect the changes.
Otherwise, the changed parameters continue to display
but no action is taken.
Next Now
Parity Yes<Yes
Retries 001001
Accept: N