Operating instructions

4-66 Menus and Commands
6-00058-05 Rev A
Figure 4-90 Aux Board Screen
Parameters Description
Board All Aux sets trace information
for all boards
LGR # displays gripper traces
LBI # displays the selected LBI
rack traces
(# = the selected rack number)
Status On enables trace
Off disables trace
Accept Y to accept changes
N to reject changes
If Y is selected, the screen updates to reflect the changes.
Otherwise, the changed parameters continue to display
but no action is taken.
SCSI Submenu
Path: Main Menu Setup Library SCSI
Use the SCSI Submenu to set the library SCSI ID, SCSI bus
type, and parity. See Figure 4-91.
Figure 4-91 SCSI Submenu
Depending on your selection, refer to:
• Target ID Dialog on page 4-67
• Parity Dialog on page 4-68
• Ports Dialog on page 4-69
Aux Trace Reporting:
Board:All Aux
Status:Off
Accept: N
> Target ID...
Parity...
Ports...