Operating instructions

Setup Menu 4-65
September 2007
Trace Submenu
Path: Main Menu Setup Library Trace
Use the Trace Submenu to define or enable the serial service
port. See Figure 4-88.
Figure 4-88 Trace Submenu
If Serial Port is selected the Serial Port Screen appears.
See Figure 4-89.
Figure 4-89 Serial Port Screen
Parameters Description
Use SERIAL indicates information
is returned via the serial port
RMU is the default to allow the
port to be used for RMU
communication
VCONSOL is used for
development only
Accept Y to accept changes
N to reject changes
If Y is selected, the screen updates to reflect the changes. Otherwise,
the changed parameters continue to display but no action is taken.
If Aux Board Trace is selected and Serial Port trace output is set to
Serial, the Aux Board Trace Screen appears. See Figure 4-90 on page
4-66.
> Serial Port...
Aux Board Trace
...
Trace output
Use: SERIAL
Accept: N
Note
If the RMU is not
installed, this
option must be
set to SERIAL in
order to prevent a
SAC from being
posted.