Operating instructions

Commands Menu 4-55
September 2007
Index The device address associated
with the selected coordinate
parameter:
DT = data transfer device
IE = insert/eject device
ST = storage device
Accept Y to accept
N to reject
If Y is selected, the Usage Screen appears. See
Figure 4-71. If N is selected, the changed parameters
continue to display but no action is taken.
Figure 4-71 Usage Screen
Parameters Description
Current Usage Indicates the number of times
the cleaning cartridge has been
used (000–511)
Maximum Usage Indicates the maximum
number of allowable uses for
the cleaning cartridge
(000–511)
Accept Y accept changes
N reject changes
If Y is selected, the accessor moves the number of cleaning
cartridges to the designated storage cells. When the
operation completes, the Response Screen appears. See
Figure 4-72. If N is selected, the changed parameters
continue to display but no action is taken.
Figure 4-72 Response Screen
CurrentUse: 000<
MaxUse: 000
Accept: N
Requested command is
now complete.
Tapes inserted: 001