Operating instructions

4-54 Menus and Commands
6-00058-05 Rev A
Figure 4-69 Insert Range Screen
Parameters Description
Insert Range Indicates the number of
elements for the insert
operation
Accept Y accept changes
N reject changes
If Y is selected, the Target Screen appears. See
Figure 4-70. Otherwise, the changed actions continue
to display but no action is taken.
Figure 4-70 Target Screen
Parameters Description
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
rack number (01–16)
The third field indicates the
storage cell section (1–5)
The fourth field indicates the
column of the section (A–P)
The fifth field indicates the
row of the column (01–15)
Insert Range: 01<
Accept : N
Enter TARGET
Coord: S 01 1< A 01
Index: ST 00001
Accept : N
Note
The starting
address is indicated
by the Coordinate
and index
parameters. If
several cleaning
tapes are inserted,
the Coordinate and
Index is specified
for the first empty
cell in a group of
consecutive empty
cells.