Operating instructions

Commands Menu 4-53
September 2007
Insert Clean Tape Dialog
Path: Main Menu Commands Insert/Eject Insert Clean
Tape
Use the Insert Clean Tape Dialog to move the selected
cleaning cartridge from the Insert/Eject station to the
designated empty storage cells. See Figure 4-68.
It is possible to manually insert a cleaning tape into an
unauthorized storage area. The use of Insert Clean is not
recommended or intended for host initiated cleaning. If you
use host initiated cleaning, the cleaning tape may not be
accessible and your drives may not be cleaned.
Figure 4-68 Insert Clean Tape Dialog
Parameters Description
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
rack number (01–16)
The third field indicates the
storage cell section (1–5)
The fourth field indicates the
column of the section (A–P)
The fifth field indicates the row
of the column (01–15)
Index The device address associated
with the selected coordinate
parameter:
DT = data transfer device
IE = insert/eject device
ST = storage device
Accept Y to accept
N to reject
If Y is selected, the Insert Range screen appears. Select
the number of cleaning tapes to insert. See Figure 4-69.
Caution
Enter SOURCE
Coord: I 01< 1 A 01
Index: IE 00001
Accept: N