Operating instructions

4-52 Menus and Commands
6-00058-05 Rev A
If your library is host partitioned, do not use the operator
panel to move a cartridge. The library does not know the
partition limits and could move a cartridge outside of the
partitioned area, making that cartridge inaccessible to the
host.
Insert Screen
Path: Main Menu Commands Insert/Eject Insert
Use the Insert Screen to move all cartridges found in the
Insert/Eject stations to the first available empty storage cells.
See Figure 4-66.
Figure 4-66 Insert Screen
The Current Source and Target elements are updated. After
completion, the response screen shows how many cartridges
are in the Insert/Eject stations. See Figure 4-67 on page 4-52.
Figure 4-67 Response Screen
If no tapes are installed, Tapes inserted indicates 000.
If one tape is installed, Tapes inserted indicates 001.
Caution
Insert in progress
Source: IE 00010
Target: ST 00471
Requested command is
now complete.
Tapes inserted: 010