Operating instructions

4-50 Menus and Commands
6-00058-05 Rev A
Accept Y to accept
N to reject
If Y is selected, the Ending Inventory Dialog appears.
See Figure 4-62 on page 4-50. Otherwise, the changed
parameters continue to display but no action is taken.
Figure 4-62 Ending Inventory Dialog
Parameters Description
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
rack number (01–16)
The third field indicates the
storage cell section (1– 5)
The fourth field indicates the
column of the section (A–P)
The fifth field indicates the
row of the column (01–15)
Index The device address associated
with the selected coordinate
parameter:
DT = data transfer device
IE = insert/eject device
ST = storage device
Accept Y to accept
N to reject
If Y is selected, the Response Screens appear. See
Figure 4-63 and Figure 4-64 on page 4-51. Otherwise,
the changed parameters continue to display but no action
is taken.
Ending Inventory
Coord: D< 03 2 A 01
Index: DT 00013
Accept : N