Operating instructions

4-48 Menus and Commands
6-00058-05 Rev A
The fourth field indicates the
column of the section (A–P)
The fifth field indicates the
row of the column (01–15)
Index The device address associated
with the selected coordinate
parameter:
DT = data transfer device
IE = insert/eject device
ST = storage device
Accept Y to accept
N to reject
If Y is selected, the Response Screens appear. See
Figure 4-57 and Figure 4-58. Otherwise, the changed
parameters continue to display but no action is taken
Figure 4-57 Response Screen
The accessor moves the cartridge from the selected
Source, to the selected Target element.
Figure 4-58 Response Screen
If an empty source element is selected, the Error Screen
appears. See Figure 4-59.
Figure 4-59 Error Screen
Requested command is
now in progress ...
Requested command is
now complete.
-=> ERROR <=-
The Source element
is empty.