Operating instructions

Commands Menu 4-41
September 2007
Move Submenu
Path: Main Menu Commands Move
Use the Move Submenu to position the gripper, scanner, or to
move media. See Figure 4-48.
Figure 4-48 Move Submenu
Depending on your selection, refer to:
• Position Gripper Dialog below
• Position Scanner Dialog on page 4-44
• Move Media Dialog on page 4-46
Note
The Scalar 10K
must be Offline
and Ready to use
the commands
under the Move
Menu.
> Position Gripper...
Position Scanner...
Move Media...
Note
The gripper or
scanner do not
move to the I/E
station if there are
no magazines in
the I/E station.