Operating instructions

Status Menu 4-37
September 2007
Firmware Dialog
Path: Main Menu Status Drives Firmware
Use the Firmware Submenu to view the drive and drive
controller, boot or control firmware revisions. See Figure 4-41.
Figure 4-41 Firmware Dialog
Parameters Description
Coord The first field displays the type
of cell (D for Drive)
The second field displays the
rack number (01–16)
The third field displays the
drive bay section (1–4)
The fourth field displays the
column of the section (A –B)
The fifth field displays the row
of the column (01–6)
Index The device address associated
with the selected coordinate
parameter DT = data transfer
device
Accept Y to accept
N to reject
If Y is selected, the Response Screen appears. See
Figure 4-42. Otherwise, the changed parameters
continue to display but no action is taken.
Figure 4-42 Selected Drive Firmware Revision
Enter Desired
Coord: D 01< 1 A 01
Index: DT 01200
Accept: N
Note
Press the
button or the
button to
scroll between
drives.
Drive: DT 0006<
Brick: 18N2
Boot: 120A.0002
Ctrl: 130A.0002