Operating instructions

Status Menu 4-33
September 2007
Parameters Description
Ser Num Displays the drive serial number
For LTO only: The last six digits
3592-J1A/TS1120on the operator
panel should match the last six
digits of the serial number on the
drive label.
The first four digits are vendor
specific and may not match.
LSN Displays the logical serial
number. The logical serial
number is the last 9 digits of the
world wide name assigned to the
drive slot, preceded by the
character “F”.
ID Displays the current SCSI/loop
ID of the drive. If the fibre
channel drive has dual ports, a
second ID field appears.
LED Displays the error code listed on
the front panel of the drive.
[more] More information on the
Continuation Screen (for fibre
channel drive only).
When [more] is selected, the Continuation Screen
appears. See Figure 4-37.
Figure 4-37 Fibre Channel Continuation Screen (Dual Port)
WWN: 500308C000068000
Speed :1GB :1GB
Topology:Loop :Loop