Operating instructions

4-32 Menus and Commands
6-00058-05 Rev A
Parameters Description
Drive Displays the element address
of the desired drive
State Displays the state of the drive
(UNINSTALLED, VARIED
OFF, NO RESPONSE,
UNKNOWN, OFFLINE,
DRIVE ERROR, LOADED,
LOADED, UNLOADED,
LOADING, UNLOADING,
REWINDING, SEEKING,
READING, WRITING,
ERASING, CLEANING,
CALIBRATING, EMPTY)
Clean Required Indicates if the drive requires
cleaning (Yes, No)
[more] More information on the
Continuation Screen
When [more] is selected and you are using SCSI drives,
Figure 4-35 appears. For SCSI drive users, this is the last
screen for Drive State Dialog.
Figure 4-35 SCSI Drive Screen
When [more] is selected and you are using fibre channel
drives, Figure 4-36 appears.
Figure 4-36 Fibre Channel Drive Screen (Dual Port)
Ser #: 6811002084
LSN : F0000CF009
ID : 3
LED : N/A
Note
For 3590 tape
drives, the Ser #,
LSN, ID, and LED
fields do not
display
information.
Note
For 3592-J1A/
TS1120 drives, the
serial number on
this screen is
library-specific and
for Quantum use
only. This number is
different from the
number physically
located on the 3592-
J1A/TS1120 drive,
which is an IBM-
specific serial
number.
Ser #: 6811002084
LSN : F0000CF009
ID : 0 : 1
LED : N/A