Operating instructions

Status Menu 4-31
September 2007
Drive State Dialog
Path: Main Menu Status Drives Drive State
Use the Drive State Dialog to view the current state of the
selected drive. See Figure 4-33.
Note: If you change any drive settings, you must Vary Off and
Vary On the drive to apply the new settings.
Figure 4-33 Drive State Dialog
Parameters Description
Coord The first field indicates the
type of cell (D for Drive)
The second field indicates the
rack number (01–16)
The third field indicates the
drive bay section (1–4)
The fourth field indicates the
column of the section (A–B)
The fifth field indicates the row
of the column (01–6)
Index Indicates the number
corresponding with the
coordinate parameter
Accept Y to accept
N to reject
When accepted, the following screen appears. See
Figure 4-34.
Figure 4-34 Drive State Continuation Dialog
Enter SOURCE
Coord: D< 01 1 A 01
Index :DT 00001
Accept: N
Drive: DT 00001<
State: Loaded
Clean Required: No
[more]