User's Guide

73
RDX 8000
Front Panel Cartridge Eject button
When allowed by the application in
Tape Library mode, or when not Ejection Protected in JBOD mode, cartridges
may be ejected via the Cartridge
Eject button. Cartridges are ejected by pressing the Cartridge Eject button for the
appropriate slot for approximately 2 seconds. If ejection is allowed, the eject button will flash green and the
cartridge will eject shortly. If ejection is not allowed, the eject button will flash amber and cartridge will not be
ejected.
RDX 8000
Please refer to the section MANAGE/Eject Cartridge for information on this method.
Emergency cartridge ejects:
Cartridges may be ejected at any time, including when the unit is powered off or in error conditions, via the
Emergency
Eject port. Cartridges are ejected by inserting a straightened paperclip, or similar device, into the
Emergency Eject Port until resistance is felt. Then provide a firm push to eject the cartridge.
NOTICE
When using the emergency eject feature the force should be applied to the
paper clip in a straight line (paper clip held square (90 degrees) in both the
horizontal and vertical planes) pushing in toward the front bezel. Avoid applying
force to the emergency eject port in any other direction or damage may occur.